WATERWAY | 1 HP IMPELLER ASSY | 310-4220

WATERWAY | 1 HP IMPELLER ASSY | 310-4220

THIS ITEM HAS CHANGED AS OF 2003 A WEAR RING (5039-014) IS REQUIRED WITH A NEW IMPELLER.
OPTIMUS # 5039-006
WATERWAY # 310-4220

GENERAL DESCRIPTION:
THIS IS A 1 OR 1-1/2 HP IMPELLER USED ON THE WATERWAY EXECUTIVE PUMP
GRAY PLASTIC IMPELLER

CLOSED FACE OR OPEN IMPELLER: CLOSED FACE

NUMBER OF VANES 6

OUTSIDE DIAMETER: 4-1/2"

THICKNESS: 3/16"
(INSIDE VANE THICKNESS AT OUTSIDE EDGE OF IMPELLER)

THICKNESS: 7/16"
(OUTSIDE VANE THICKNESS AT OUTSIDE EDGE OF IMPELLER)

FRONT TO BACK: 3-1/16"
(FROM END OF SHAFT TO FRONT ON INTAKE)

INLET INSIDE DIAMETER: 2-3/16"
INLET OUTSIDE DIAMETER: 2-3/8"

MARKINGS:
THIS IMPELLER HAS PART NUMBER MARKINGS FOR THE 1, 2, 3, 4, AND 5 HP IMPELLER
THE DIFFERENCE IN EACH HORSEPOWER IMPELLER WILL BE THE THICKNESS OF THE IMPELLER

THESE ARE THE MARKINGS FOUND ON THE INLET SIDE

1 HP 310-4220
2 HP 310-4210
3 HP 310-4200
4 HP 310-4190
5 HP 310-4180
COVER 313-1700

SHAFT SEAL USED WITH THIS IMPELLER
OPT # 5250-106
GENERIC # PS-1000