PENTAIR | IMPELLER CMK - 100 - 10 HP | 070226

PENTAIR | IMPELLER CMK - 100 - 10 HP | 070226

Pentair 070226 CMK 100 10HP MED Head Impeller C-Series is a specified replacement part for a pump in a pool or spa system. This Pentair pool pump impeller features a 10-horsepower motor and is compatible with C-Series pumps. This impeller has a medium head, making it useful in situations where just a moderate amount of pressure is needed. People working in the pool and spa industry or with experience maintaining and repairing such facilities are the most likely to use the product. This is a 10 hp impeller used on the pentair Purex cmk-100 10 hp, medium head, "c" series commercial pump. This has a slight keyed extension on the closed end. The open end, which faces the motor, is slightly smaller in diameter than the opposite end, where the vanes are located.

Product Specifications

Frequently Asked Questions

Is this an OEM part?

Yes, this is an OEM Pentair 070226 CMK 100 10HP MED head impeller C-series.

How can I set up a Pentair 070226 CMK 100 10HP MED head impeller?

Typically, these procedures are used when putting in a new Pentair 070226 CMK 100 10HP MED Head Impeller:

• The pump should be turned off immediately.
• The pump's housing or cover can be disassembled by removing the corresponding bolts or screws.
• Disconnect the pump's motor by removing its housing.
• If the impeller on your motor has seen better days, you may get rid of it by removing a single screw or bolt and sliding it off the shaft.
• Ensure the new impeller is firmly attached to the motor shaft before proceeding.
• Make sure the pump casing is aligned with the motor and fastened with bolts or screws before using it again.
• You should turn on the power to the pump and make sure it is working correctly.

Pentair 070226 CMK 100 10HP MED Head Impeller, can you enlighten me about its compatibility?

Pentair challenger and pinnacle high-flow pool pumps that are compatible with the Pentair 070226 CMK 100 10HP MED head impeller. It is made for use with Pentair's Challenger and Pinnacle series of pool pumps with a 10 HP motor and a MED head rating. It's crucial to check if this impeller will work with your pool pump model before you buy it. In order to find out if two items are compatible with one another, you may either read the manufacturer's guidelines or contact a pool expert.