BRETT AQUALINE | 15" FLOW THRU, 5.5kW/240V,2 1/4 TUBE | 90-225020

BRETT AQUALINE | 15" FLOW THRU, 5.5kW/240V,2 1/4 TUBE | 90-225020

OPTIMUS # 9144-04 THERMCORE # C2550-0066ET-A AQUATEMP # 20-00319 THIS IS A 15", 2.25" DIAMETER STAINLESS STEEL FLOW THRU HEATER THIS IS A BRETT AQUALINE REPLACEMENT HEATER. ORIGINAL MFG # WAS 22-5020 LENGTH: 15" (LENGTH OF TUBE ONLY FROM FLANGE TO FLANGE) DIAMETER: 2.25" ENDS: FLANGED WITH UNIONS WATTAGE: 5.5 KW, 240 VOLTS (1.4 KW AT 120 VOLTS) TAILPIECES: (2) 2" SLIP X 1-1/2" SPG TAILPIECES, REPLACABLE UNION NUTS, O-RINGS 1-1/2" PIPE WILL GLUE INSIDE AND A 2" FITTING WILL GLUE OUTSIDE (THREADS ON 2" UNION TAILPIECES ACTUALLY MEASURE 3-1/16" DIAMETER) ******************************************************************************************************************************** DETAIL MEASUREMENTS - THE MEASUREMENTS SHOWN ARE FROM THE FLANGE CLOSEST TO THE ELEMENT LEAD TO THE CENTER LINE OF THE ITEM ELEMENT LEADS: 2) THESE ARE REPLACEABLE AND INCLUDE ELECTRICAL CONNECTER NUTS AND WASHERS 1ST LEAD 4-1/4" FROM FLANGE 2ND LEAD 5-1/2" FROM FLANGE THERMOWELLS: (1) EXTERNAL DUAL THERMOWELL MOUNT ON THE SIDE OF THE HEATER LOOKING AT THE HEATER FROM THE SIDE WITH THE ELEMENT LEADS TO THE RIGHT, THIS IS ON THE BACK SIDE AWAY FROM YOU 7-1/2" TO THE CENTERLINE OF THE THERMOWELL PRESSURE SWITCH TAP: 13-1/4" FROM FLANGE THIS IS IN LINE WITH THE THERMOWELL ON THE SIDE 1/8" FEMALE THREADS, THIS COMES PLUGGED, BUT PLUG MAY BE REMOVED (1/8" THREADS ACTUALLY MEASURE ABOUT 7/16" DIAMETER) THREADED STUDS: THERE ARE NO EXTRA THREADED STUDS ON THE HEATER