BALBOA/VICO | IMPELLER, 1 HP - BLACK STRIPE | PPUF1OIMP

BALBOA/VICO | IMPELLER, 1 HP - BLACK STRIPE | PPUF1OIMP

OPTIMUS # 5190-152
VICO/BALBOA # 1212205
OLD VICO # PPUF10IMP

************************************************
GENERAL DESCRIPTION:

CLOSED FACE GRAY IMPELLER, 1 HP

THE INLET OPENING IS DOUBLE STEPPED

THE SHAFT SIDE OF THE IMPELLER IS FLAT
THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE THE THE INLET

THIS HAS A STRIPE ON THE SHAFT TO IDENTIFY THE IMPELLER

************************************************
MATERIAL: GRAY PLASTIC

TYPE: CLOSED FACE

NUMBER OF VANES: 5

************************************************
DIMENSIONS:

OUTSIDE DIAMETER 4-1/4" (A)

TOTAL LENGTH: 3-3/8"

OUTSIDE THICKNESS AT EDGE: 3/8" (B)
INSIDE THICKNESS AT EDGE: 1/4"

SHAFT LENGTH: 1-7/8"
SHAFT DIAMETER: 11/16"

INLET OPENING OUTSIDE DIAMETER: 2"
INLET OPENING INSIDE DIAMETER: 1-1/2"
THE INLET OPENING IS BEVELED INSIDE

THE ROUND STEP BELOW THE INLET IS 2-3/8" DIAMETER.

INLET OPENING LENGTH: 3/4" (INCLUDING BOTH STEPS)
THE INLET OPENING AND THE LARGER STEP ARE BOTH ABOUT 3/8"

************************************************
MARKINGS:

STRIPES ON SHAFT
STARTING FROM THE END THESE ARE:

BLACK

SPECIAL NOTE: CURRENT IMPELLERS ARE BEING MADE WITH
NO STRIPES ON THE SHAFT