BALBOA | ELECTRONIC SPA CONTROL | 54220-Z

BALBOA | ELECTRONIC SPA CONTROL | 54220-Z

THIS IS A BALBOA RETRO-FIT SPA CONTROL DESIGNED AS A COMPLETE
REPLACEMENT CONTROL

INCLUDES:
53267HC2 CONTROL CONVERTIBLE 120 / 240 VOLTS
M-7 STYLE SYSTEM, USES SENSORS INSTEAD OF PRESSURE SWITCH
INCLUDES A 5.5 KW 240V / 1.4 KW 120V FLOW THRU HEATER

RECEPTACLE FOR 2-SPEED PUMP 120 / 240 VOLTS

RECEPTACLE FOR SINGLE SPEED PUMP 120 / 240 VOLTS
OR
RECEPTACLE FOR BLOWER 120 / 240 VOLTS
(THIS RECEPTACLE MAY BE USED FOR EITHER A 2ND PUMP, SINGLE SPEED, OR A BLOWER)

RECEPTACLE FOR OZONATOR 120 / 240 VOLTS (MUST BE SAME VOLTAGE AS 2-SPEED PUMP)

RECEPTACLE FOR SPA LIGHT 12 V - 1 AMP

CONTROL BOX IS GRAY PLASTIC
DIMENSIONS:
HEIGHT: 10-1/2"
WIDTH: 12-5/8" (BOX ONLY)
13-1/2" (INCLUDING GROUNDING TERMINAL ON THE SIDE)
13-7/8" (OUTSIDE OF THE BOTTOM MOUNTING FEET)
DEPTH: 4-5/8" (BOX)
5" (FROM FRONT OF HEATER UNION NUT TO BACK OF CONTROL)

HEATER 15" LONG FLOW THRU STYLE (MEASURED FROM FLANGE TO FLANGE)
2-1/4" DIAMETER TUBE
UNION ENDS ARE 2" SLIP
CENTERLINE OF THE HEATER IS 2-7/8" FROM THE BOTTOM OF THE CONTROL FEET

11718 ADAPTOR FOR SPASIDE CONTROL
BLACK TEXTURED PLASTIC WITH PEEL OFF STICK ON GASKET ON THE BACK
OUTSIDE DIMENSIONS ARE 8-1/2" x 3-1/2"
INSIDE DIMENSIONS ARE 3-1/2" x 1"
THE ADAPTOR IS USED TO ADAPT THE SMALL SPASIDE TO TAKE THE PLACE OF AN EXISTING LARGER SPASIDE CONTROL

52144 MINI OVAL SPASIDE CONTROL
OUSIDE DIMENSIONS ARE 4-3/8" x 1-1/2"
USES AN 8 PIN PHONE PLUG TYPE CORD
CORD IS 7 FT LONG
BUTTONS:
BLOWER, JETS, TEMP, LIGHT

11127 EXTRA SPASIDE CONTROL LABEL
USED IF THERE IS NO BLOWER TO CONTROL
BUTTONS:
JETS, JETS, TEMP, LIGHT

AMP CORDS THESE ARE ALL 4 POSTION TYPE AMP CORDS, 5 FT LONG
THERE IS 1 - 4 PIN CORD FOR A 2 SPEED PUMP
THERE ARE 2 - 3 PIN CORDS FOR OTHER EQUIPMENT

LIGHT STANDARD BALBOA LIGHT HARNESS, 10 FT LONG HARNESS
INCLUDES HARNESS WITH PLUG IN TO MATCH BOX
TWIST LOCK TYPE REFLECTOR AND 12 VOLT BULB

THRU WALL FITTING IS NOT INCLUDED